Try running the machine without a filter. Old filters can get mucky and may need to be re-filtered, or may need to be replaced. Remove the water softener if you are using one.If the pumps runs, and no water is coming out, make sure that the water tank is seated properly into the socket on the water res support.If the power cord needs to be replaced, we would recommend having the machine professionally repaired. Electrical testing will need to be done to check the power cord of the espresso machine. The boiler will be accessible and the leads for the element will be visible coming out of the top of the boiler and they can be tested with a meter for continuity and voltage. Once removed the top will lift off exposing the machine. There are two screws in the front, two screws that hold the OPV adjustment to the top, and two screws on the backside of the panel that hold it to the res plate. The machine top is held on by six 2.5mm screws. Take out the water reservoir and set it to the side. Remove the upper cup warming tray and the cover for the water reservoir. If you’d like to get in to the machine yourself, make sure the machine is off and unplugged.If Yes, we recommend having the machine serviced by a tech.Try testing another appliance on the same outlet.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |